400 ml
Art. No: W140437
(ASTM 780 Approved / 550 Hours Salt Water Resistance) Contains more than 98% purity zinc and zinc compounds, provides long-term protection against corrosion in metals.
Details
500 ml
Art. No: W170121
Thanks to its special content, it cools the applied surfaces up to -50°C in a short time. In cases where urgent intervention to hot parts is required, it shortens the repair time and saves time by rapidly cooling the part. Can be used in industrial areas and electronics.
Details
600 ml - gray
Art. No: W160259-GY
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
400 ml
Art. No: W150154
Formulated as mould release agent in plastic injection moulds. It ensures that metal and plastic are separated from each other without any problem.
Details
300 g
Art. No: W170123
General purpose cleaning and care paste. Removes dirt, lime and yellowing residues in one step. Provides industrial performance at many points such as kitchen, bathroom, garden furniture etc.
Details
600 ml - white
Art. No: W160259-WH
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
500 ml
Art. No: W140620-500
Single component. It can be applied as a topcoat protection on aluminium surfaces or over the old galvanised layer. Provides cathodic protection. Conforms to ISO 3549 and ASTM A780. Before application, it should be mixed thoroughly with a suitable mixer until it becomes homogenous in the box. Provides 40 to 60 μ thickness in single coat application.
Details
250 ml
Art. No: W150164
Details
500 ml
Art. No: W170130
Formulated for powerful cleaning and fireproofing. It dissolves and removes residues and deposits with its effective formula that cleans and dries in a short time.
Details
30 lt
Art. No: W140614-30
It is a gel product used to clean welding stains, oxide marks and rust stains especially on stainless steels with low sulphur content. It can be applied in industrial areas, kitchens, installations, machinery, etc. on surfaces with stainless surface contamination. Cleaning the surfaces before application increases the effectiveness of the product even more.
Details
400 ml
Art. No: W160109
IMPA. CODE: 450832
It is a spray product that provides dry film lubrication in equipment with sliding friction. Thanks to MoS2 additive, it reduces friction in systems operating under heavy load. For best results, it is important that the application surfaces are clean and dry.
Details
80 ml - blue
Art. No: W200073
IMPA. CODE: 812656
Hylomar is a technically advanced, permanent plastic polyester-urethane sealant.
Details
300 ml - white
Art. No: W160261-WH
Adhesive, impermeable, single component, is a strong adhesive and filling material based on polyurethane.
Details
300 ml
Art. No: W160172
It is used for cleaning rust on lawn mowers, garden tools, hinges, screws, nuts, gates and fences, bicycle wires, rusty car and caravan parts, loosening rusted and oxidised screw connections, cleaning rust on cars, trucks, agricultural and construction machinery and equipment.
Details
310 ml - black
Art. No: W160255
IMPA. CODE: 812843
Oxime-based, high temperature resistant gluing and sealing is silicone.
Details
400 ml - copper
Art. No: W160101
IMPA. CODE: 450565
Spray assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant against water, petrol, oil, grease and gases.
Details
250 ml - green
Art. No: 20619
Hot oil resistant and high-strength clamper developed especially for passive surfaces.
Details
200 ml - red
Art. No: W200506
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
310 ml - transparent
Art. No: W160266
Modified silane based, one component, moisture curing bonding and sealing material.
Details
25 l
Art. No: W140616
Welding protection with excellent separation properties, especially developed for welding processes in container, wagon and shipbuilding.
Details
400 ml - amber
Art. No: W200011
Two-component, yellow coloured methylmethacrylate based adhesive. Extremely high strength. Resistant to weather conditions.
Details
30 l
Art. No: W170120-30
It is a water-based cleaner used to remove residues such as dirt, oil and ink from all kinds of surfaces. It can be biologically separated into its components in nature. The concentrated product can be diluted with water according to the type of surface and dirt to be cleaned and specialised for the purpose of use.
Details
400 ml
Art. No: W170108
IMPA. CODE: 450619
It is a mineral oil based organic solvent developed for cleaning electronic cards and sockets. Cleans contacts, fuses, cable connections from oxidation and dirt. Repels water and moisture. Forms a wet film on the surface after application.
Details
5cm x 3.5m
Art. No: 20066-535
IMPA. CODE: 812362
It is a resin impregnated, glass fibre reinforced tape. The kit also includes Winkel Pro Knead Steel epoxy putty.
Details
1 l
Art. No: W800655
In injection moulds, it cleans the mould when changing plastic raw materials of different types and colours, and eliminates colour-related problems in the next printing.
Details
