50 ml - yellow
Art. No: 20606
IMPA. CODE: 815226
Medium strength conventional clamp developed especially for cylindrical joints.
Details
5 l
Art. No: W150215-5
Cutting fluid developed for soft metals, yellow and alloys. It enables precise machining on soft metals with its superior cooling effect.
7.5cm x 2.5m
Art. No: 20066-725
IMPA. CODE: 812365
It is a resin impregnated, glass fibre reinforced tape. The kit also includes Winkel Pro Knead Steel epoxy putty.
1 kg
Art. No: W150206
IMPA. CODE: 450526
General purpose bearing grease containing EP additives and lithium soap. Resistant to water washing. Provides long-term lubrication where applied. Minimises corrosion and wear. Ideal for lubrication of systems operating under extreme pressure, heavy and vibrating loads.
50 ml - cream white
Art. No: 20063
It is an impact-resistant, two-component special structural adhesive. It is solvent free. It is used for bonding difficult to bond surfaces/metals such as polypropylene (PP), polyethylene (PE), PTFE, EPDM (ethylene propylene diene monomer) and plastics with low surface energy.
400 ml
Art. No: W150130
IMPA. CODE: 450825
It is a colourless, PTFE-containing dry film lubricant for metal, rubber, plastic and other materials. Ideal for applications where grease cannot be used due to pollution and aesthetics. Suitable for use in the electrical, plastics, textile and automotive industries
Art. No: W140450
It is high temperature resistant brass plated. Metal, wood, plastic, glass etc. It provides very good adhesion on surfaces. It gives the surface a golden appearance.
Art. No: W140620
IMPA. CODE: 252102
Single component. It can be applied as a topcoat protection on aluminium surfaces or over the old galvanised layer. Provides cathodic protection. Conforms to ISO 3549 and ASTM A780. Before application, it should be mixed thoroughly with a suitable mixer until it becomes homogenous in the box. Provides 40 to 60 μ thickness in single coat application.
30 lt
Art. No: W140621
Spreadable wax containing corrosion inhibitor. It prevents rust formation by protecting all metals, machinery and equipment against corrosion.
30 l
Art. No: W600540
Provides effective lubrication by penetrating into the metal on the applied surface. Prevents corrosion, jamming, bimetal corrosion and noise problems. Does not migrate from the applied surface, has an upper resistance temperature of +250°C. It is especially ideal for high speed chains and ropes.
Art. No: W140447
It is resistant to weather conditions and 280°C heat. Provides very good adhesion on metal, wood, glass, stone etc.
2 kg
Art. No: W140618-2
Gel form cleaner used for cleaning surfaces after stainless welding. It does not allow any yellowing and rust formation. Especially ideal in the production of industrial kitchens and equipment. It is applied to the surfaces with a brush.
Art. No: W160105
NSF H1 approved lubricant for processes in direct contact with or processing food. Provides safe and effective solution thanks to its special and approved formulation. It extends the service time especially in expensive equipment under the risk of wear due to friction.
16 kg
Art. No: W150205-16
Art. No: W140441
IMPA. CODE: 450810
Aluminium coating with shiny chrome effect. Provides very good adhesion on metal, ceramic, wood and glass.
Art. No: W140609-SET5
The mineral-based 5-function lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
500 ml - green
Art. No: W150144
Enables non-destructive crack control on surfaces.
Art. No: W150204-1
It is a food approved grease used for lubrication and corrosion prevention in parts in contact with food. Transparent and odourless.
Art. No: W140605
It has been developed to remove lime deposits on copper, aluminium etc. pipes in cooling towers. It is very effective in removing residues in heating and cooling systems (e.g. heat exchanger). It can be diluted to different concentrations according to the degree of pollution.
50 ml - blue
Art. No: 20803
It is an innovative paint product that replaces conventional sealing materials and is used to seal moving or warranty parts.
60 l
Art. No: W150203-60
The erosion lubricant ensures the most perfect machining of the part in wire erosion processes. It is especially suitable for sensitive and finely detailed parts. It provides the most suitable dielectric property in EDM (Electro Discharge Machining) processes. Low volatile. Creates little smoke. It can also be applied by dipping method.
Art. No: W150157
IMPA. CODE: 450603
Developed for the maintenance of flat, axial and V-belts made of all PVC, rubber and leather. It feeds the belt, reduces noise and keeps the belt on the pulley axis.
600 ml - gray
Art. No: W160259-GY
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
500 g
Art. No: W150216
IMPA. CODE: 614198
High alloyed carbon types, chrome-nickel alloys, stainless and heat resistant alloys, titanium, manganese, cast steel, cast iron, etc. Ideal for levelling operations such as tapping, drilling, turning and cutting.
250 ml - red
Art. No: 20313
IMPA. CODE: 812785
Traditional high-strength adhesive product developed for fixing and sealing metal screws.
